According to the National Institute of Dental and Craniofacial Research (NIDCR), 3.75% of adults 20 to 64 in the United States are completely edentulous. For the overall population in this age group, the average number of remaining teeth is 24.92 out of a total of 32 permanent teeth.
One of the ways to replace missing teeth to restore oral function and appearance is with dentures. Depending upon the needs of a case, dentures can be used to replace either a few teeth that have been lost or all of the teeth in the upper or lower jaws. In addition to reestablishing the look of a complete and natural smile, dentures also restore support to the natural contours of the face to eliminate the “sunken” appearance that results from losing multiple teeth. Whether teeth have been lost for reasons of tooth decay, gum disease, a medical condition, congenital anomaly, or trauma, dentures are an effective method of care.
Dentures are removable appliances that are designed to precisely and comfortably rest on top of the gums that cover the jawbones. They can be taken out of the mouth for brief periods of time to fulfill the oral hygiene requirements of maintaining the underlying tissues, cleaning the dentures, and sleeping.
Types of Dentures
The two main types of dentures are: full dentures and partial dentures. Both types are custom fabricated based on the exact specifications obtained from dental impressions and detailed functional as well as esthetic information provided by the dentist.
Full Dentures
Full dentures, which can also be referred to as, “complete dentures,” are designed to replace all of the upper or lower teeth. A complete maxillary denture, more commonly known as a, full upper denture, typically consists of a base that covers the roof of the mouth with a full complement of artificial teeth set around the section covering the dental arch. On the other hand, a complete mandibular denture, or full lower denture, is designed to accommodate the tongue and is horseshoe shaped with teeth set along the portion that covers the underlying dental arch.
Partial Dentures
A partial denture is a type of removable prosthesis that is designed to restore a complete and functional smile in cases where multiple teeth are missing or require extractions, while some healthy teeth remain in the dental arch. Custom fabricated for a precise fit and cosmetically pleasing appearance, partial dentures are typically secured and stabilized with clasps or precision attachments to select teeth adjacent to the edentulous areas. Depending upon the number of teeth being replaced as well as the functional and aesthetic requirements of the case, a partial denture can be fabricated from a combination of cast metal and acrylic materials, acrylic alone, or thermoplastic resins such as ValplastTM, Flexite®, Duroflex® and tcs®.

Dentures are removable prosthetic appliances that replace missing teeth and the surrounding gum tissue to restore appearance and basic function. They consist of artificial teeth set into a base that fits over the gums and transfers chewing forces across the supporting tissues. Modern dentures are crafted from durable materials and designed to balance aesthetics with functional needs.
Removable dentures can be taken out for cleaning and overnight rest, which helps maintain oral hygiene for both the prosthesis and any remaining natural teeth. The fit and stability of a denture depend on careful impressions or digital scans and precise fabrication to match a patient’s anatomy. Regular follow-up allows clinicians to monitor fit and make adjustments as tissues remodel over time.
There are several denture types to address different needs, including partial dentures that replace one or more missing teeth, complete dentures that restore an entire upper or lower arch, and immediate dentures placed on the day of extractions. Specialized options include overdentures that gain support from remaining tooth roots and implant-supported dentures that attach to dental implants for added stability. Material and design choices vary from flexible resins to traditional acrylic and metal frameworks depending on comfort and durability goals.
Partial dentures often use clasps or precision attachments to integrate with existing teeth and help prevent unwanted shifting, while full dentures rely on tissue contact, suction, or attachments for retention. Immediate dentures provide an immediate cosmetic and functional solution during healing but typically require relines as tissues change. Implant-supported designs can be removable or fixed and generally offer greater chewing efficiency and reduced movement during speech and eating.
Candidacy for dentures is determined through a comprehensive clinical exam that evaluates the condition of remaining teeth, gum health, jawbone volume, bite relationships, and overall medical history. Patients with healthy oral tissues or those whose remaining teeth are nonrestorable may be appropriate candidates for partial or complete dentures after any necessary preparatory care. The clinician also considers lifestyle needs and functional goals to recommend the best prosthetic option.
When jawbone or tissue quality is a concern, alternative or adjunctive treatments such as overdentures or implant-supported solutions may be discussed to improve retention and preserve bone. A personalized treatment plan outlines preparatory procedures, timelines, and expected outcomes to ensure the denture meets both functional and cosmetic objectives. Your dentist will explain options and coordinate any surgical or restorative phases if implants or extractions are required.
The denture process begins with a thorough assessment, diagnostic imaging when necessary, and precise impressions or digital scans to capture the oral anatomy. Clinicians and laboratory technicians collaborate on tooth selection, shade, and arrangement, followed by try-in appointments that allow patients to confirm tooth position and bite before final processing. Final delivery includes evaluation of fit and function with adjustments made as needed to optimize comfort.
Preparatory treatments such as extractions, minor bone reshaping, or periodontal therapy may be performed before final denture fabrication to create a healthy foundation. Immediate or transitional dentures can be provided when teeth are removed so patients do not go without teeth during healing, but these often require relines as tissues remodel. At Vernon Woods Dental & Implant Center the team schedules follow-up visits to fine-tune fit and address any adaptation concerns.
It is also important to brush and floss any remaining natural teeth and to clean the gums, tongue, and palate with a soft toothbrush to promote tissue health. Remove dentures before going to bed to give oral tissues a restorative break and reduce the risk of sore spots or inflammation. Routine dental checkups allow the clinician to professionally clean the prosthesis, inspect tissue health, and perform any needed adjustments or repairs.
Adapting to new dentures generally takes days to a few weeks, though individual experience varies based on the type of denture and the patient’s oral anatomy. Early changes such as increased saliva flow, minor speech alterations, and differences in chewing feel are common and typically improve with practice and gradual dietary adjustments. Starting with soft, bite-sized foods and chewing slowly on both sides helps distribute pressure evenly during the adaptation period.
Speech often improves with exercises like reading aloud or repeating difficult words until tongue and lips learn the new contours. If sore spots develop, brief periods of wear followed by an adjustment appointment help the clinician pinpoint pressure areas. Persistent discomfort, difficulty eating, or speaking concerns should be evaluated promptly so necessary adjustments can be made.
Yes, dentures can be stabilized or retained using dental implants, which provide secure anchor points in the jaw and significantly reduce denture movement during function. Implant-supported dentures can be removable for easy cleaning or fixed in place for a more permanent restoration, improving biting force and patient confidence with speech and eating. This approach also helps preserve jawbone by restoring functional stimulation that would otherwise be lost after tooth removal.
The number and placement of implants depend on the arch being restored and the patient’s bone quality, and implants are planned with diagnostic imaging and clinical coordination between surgical and restorative phases. Implant-retained solutions often require an initial healing period, after which attachments or bars are connected to support the denture. Your dentist will review candidacy and expected outcomes to determine whether an implant option is appropriate.
Relines are recommended when a denture no longer fits closely against the tissues due to natural bone and gum changes, while repairs address breaks, cracked teeth, or damaged clasps that affect function. Because oral anatomy shifts gradually over time, periodic relines restore proper fit and comfort and can often be completed chairside or in the laboratory depending on the situation. Prompt attention to cracks, worn teeth, or loose components prevents further damage and maintains oral health.
Replacement becomes necessary when a denture shows extensive wear, when repeated repairs no longer restore satisfactory function, or when tissue changes make an updated design the safer long-term option. Regular dental visits allow the clinician to monitor fit, assess tissue health, and recommend relines or replacement before problems progress. Addressing issues early ensures better comfort, chewing efficiency, and prosthesis longevity.
Replacing missing teeth with a well-designed denture restores facial support and can prevent the sunken or aged appearance that sometimes accompanies significant tooth loss. By reestablishing proper tooth height and lip support, dentures help maintain more natural facial proportions and improve chewing and speech function. However, conventional removable dentures do not stop bone resorption entirely because they rest on the tissues rather than replacing tooth roots.
For patients concerned about preserving jawbone, options such as overdentures or implant-supported prostheses offer improved stimulation to the underlying bone and can slow resorption. During your evaluation at Vernon Woods Dental & Implant Center clinicians assess facial balance and bone health to recommend the restorative approach that best supports both appearance and long-term oral structure. A tailored plan helps protect your oral health while restoring a confident smile.
Follow-up visits focus on evaluating fit, checking for sore spots, refining occlusion, and ensuring the denture performs well during speech and eating. Early appointments typically occur within the first few days to weeks after delivery, with additional checks scheduled as needed to monitor tissue changes and make relines or small adjustments. These visits also allow professional cleaning of the prosthesis and inspection of remaining natural teeth and soft tissues.
Long-term preventative visits let the clinician track bone and gum health, address maintenance or repairs, and plan for relines or replacement as tissues remodel. Bringing the denture to appointments helps the team assess wear patterns and retention and to recommend stability options such as adhesives or implant support if indicated. Regular follow-up care is key to maintaining comfort, function, and oral health over time.

Ready to schedule your first visit and to join the Vernon Woods Dental & Implant Center family?
Scheduling your visit or getting answers to your questions is simple. The helpful team at Vernon Woods Dental & Implant Center is here to assist you! We can easily help you book appointments, explain treatment details, and address any concerns you have. Connect with us however you prefer—by phone or our quick online form. Don't delay your smile goals; contact us today and experience the comfort and confidence that personalized dental care provides.